Once you have mixed the WET-SEAL additive with 55 pounds of Portland cement you will have WET-SEAL as the finished product, which will cover:

400 square feet (concrete with wooden float finish)

300-350 sq. ft. (rougher surface: exposed aggregate)

450-500 sq. ft. (polished surface: must be etched)

Avoid direct and continuous contact with the mixture as the cement and other chemicals may cause skin irritation. Use rubber gloves and goggles.  Wash thoroughly after use.  In case of skin or eye contact, rinse immediately with clean water.  Do not rub eyes.  If irritation persists, contact a physician.  Keep out of children’s reach.